Sp-controls CatLinc Manual de usuario Pagina 11
- Pagina / 20
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
8
CONNECTING THE TRANSMITTER
CatLinc VGA
1) Connect the 15 pin HD D-sub connector labeled SOURCE on the
Transmitter to the VGA output port on the laptop or computer.
2) Attach one end of the CAT5 cable into the RJ-45 jack labeled CAT5 on
the Transmitter.
3) Mount the device anywhere with the Velcro strips provided.
4) Set your PC or laptop to export the VGA signal (settings vary - refer to
your PC documenation or Help for more information).
(Figure 8 - Typical CatLinc VGA Connection)
CONNECTING THE TRANSMITTER Cont.’d
CatLinc VGA-L
1) Connect the Transmitter 15-pin male HD D-sub connector with the COM-
PUTER icon to the VGA output port on the laptop or computer.
2) Attach the 15-pin female HD D-sub connector with the MONITOR icon on
the Transmitter to a VGA cable, or terminate with a male 75 ohm VGA plug
(the loopback must be terminated). Connect the other end of the VGA cable
to the VGA input of your local monitor.
3) Attach one end of the CAT5 cable into the RJ-45 jack labeled CAT5 on
the Transmitter.
4) Mount the device anywhere with the Velcro strips provided.
5) Set your PC or laptop to export the VGA signal (settings vary - refer to
your PC documenation or Help for more information).
CatLinc VID
1) Connect the yellow RCA connector labeled VIDEO on the Transmitter to
the RCA video output port on the VCR or video device.
2) Connect stereo audio from the source device to the red (right channel)
and white (left channel) RCA’s labeled AUDIO on the transmitter.
3) Attach one end of the CAT5 cable into the RJ-45 jack labeled CAT5 on
the Transmitter.
4) Mount the device anywhere with the Velcro strips provided.
CatLinc S-VID
1) Connect the mini-DIN connector labeled SOURCE on the Transmitter to
the S-Video mini-DIN output port on the DVD Player or video source.
2) Attach one end of the CAT5 cable into the RJ-45 jack labeled CAT5 on
the Transmitter.
3) Mount the device anywhere with the Velcro strips provided.
9
- CatLinc™ 1
- User’s Manual 1
- SP2-SMCHAS-AG 2
- CatLinc NET 2
- Cat:Linc RS-232 2
- Cat:Linc DA-8 2
- CONNECTING THE TRANSMITTER 10
- Table 2 - RJ-45 Pinouts 12
- CatLinc HD 12
- TROUBLESHOOTING 13
- CatLinc VID 14
- CatLinc S-VID 14
- Distance/Resolution 15
- TECHNICAL SPECIFICATIONS 15
- CatLinc VGA/VGA-L 15
- Detail Adjust 16
- CatLinc VGA-L 17
- FCC COMPLIANCE 17
- COPYRIGHT 17
- INTRODUCTION 18
- CatLinc VGA 18
- WARRANTY 18
- IMPORTANT SAFETY INSTRUCTIONS 19
Relacionado con productos y manuales para Audio Sp-controls CatLinc
Audio Sp-controls PixiePlus Manual de usuario
(6 paginas)
(6 paginas)
Flowserve PRS 9 manuali
Manuali dei proprietari e guide per l'utente per Hardware Flowserve PRS 9.
We fornisce 2 manuali pdf Flowserve PRS 9 per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Comentarios a estos manuales